1. <tr id="nogok"><nobr id="nogok"><ol id="nogok"></ol></nobr></tr>

          <tr id="nogok"></tr>
          Medical

          UHMWPE Membrane

          UHMWPE-Membrane-Cobetter-02.jpg


          Cobetter has developed a superior performance membrane with excellent air permeability and wide chemical compatibility, by combining the technologies of gel extrusion and biaxial stretching of ultrahigh molecular weight polyethylene (UHMWPE) based on professional and rich experience in membrane fabrication. Besides, Cobetter has realized the sintered Polyethylene membrane by mastering the special technology of calcination. 


          The ultrahigh molecular weight polyethylene (UHMWPE) microporous membrane is constructed entirely from high-density and ultra-weight polyethylene, it is a unique polymer with outstanding physical, chemical and mechanical properties. Most notable are its chemical inertness, lubricity, impact resistance and abrasion resistance. Therefore, it has better initial cleanliness and lower contaminant extrables compared with polypropylene and polysulfone. 

           

          Not requiring prewetting with solvent-based chemicals, UHMWPE membrane provides maximum chemical compatibility, longer lifetime, lower operational costs and a more consistent, reliable process. Because of higher strength versus volume ratio, UHMWPE can apply to smaller medical device profiles possible than ePTFE. And it is easy to handle and convert even at lower temperature. 


          Availability of graft material suitable for stent graft application is rather limited and ePTFE remains almost the only choice for small profile stent grafts. However, the results from angiographical, radiographical and histological analysis performed on all implanted stent grafts shows that UHMWPE membrane exhibits great promise as an alternative graft material for use in vascular stent graft application. In comparison to typical ePTFE, this thin and highly porous UHMWPE membrane is mechanically strong and isotropic with a breaking strength of ~20 Mpa, and hence is particularly suitable for making low profile stent grafts. 


          Owning to its excellent properties, the porous Polyethylene membrane can achieve high fillabiility of ultra fine particles and high resin impregnability, give it wide applications to use as a supporting material for various functional material. If you require parts to be manufactured to a certain size or shape, as well as volume to your requirement, pls contact us: sales@cobetterfilter.com.


           

          Features and Benefits

          ? Extreme thinness, high porosity and strength

          ? Superior characteristics of abrasion resist and low friction coefficient

          ? Excellent corrosion resistance and chemically resistant to most acids, alkalis, solvents and hydrocarbon based fuels.

          ? Ideal alternative synthetic graft material for vascular convered-stent, particularly low profile covered-stent application.

          ? Benefit to its excellent processability, it offers and will expand a wide range of applications.


          Application

          ? Angiographical, radiographical and histological analysis

          ? Peripheral stent graphs in treating peripheral artery disease

          ? Porous material accepts surface coatings or drugs

          ? Removing metal ions from acidic aqueous solutions

          ? Used as a biomaterial, such as orthopedics as a bearing material in artificial joints. 

          Separating and purifying complex drugs and simplify the process greatly.


          Specification

          Cat. No.

          Total Weight 
          per Surface 
          Area

          ThicknessPorosity

          Air Permeability
            s@1in2 *100ml

          Pore Size

          Melting 
          Temperature
          Deg C

          Tensile 
          Strength
          (MD)

          Elongation
          (MD)

          UPE-1.0C20 g/m2100 μm806.21.0 μm130℃2.468 Mpa30.4%
          UPE-0.2C15 g/m265 μm8014.40.2 μm130℃6.524 Mpa78.4%
          UPE-0.015M5 g/m29 μm57.4770.30.04 μm130℃194.455 Mpa28.2%
          UPE-0.025M4 g/m210 μm51.73124.40.04 μm130℃103.379 Mpa59.0%
          UPE-0.04M5 g/m210 μm64.6654.30.05 μm130℃144.89 Mpa56.6%


          Validated Sterilization MethodUPE-1.0CUPE-0.2CUPE-0.015UPE-0.025UPE-0.04
          ETOPASSPASSPASSPASSPASS
          SteamNOT PASSNOT PASSNOT PASSNOT PASSNOT PASS
          Gamma (25KGY)PASSPASSPASSPASSPASS
          Gamma (50KGY)PASSPASSPASSPASSPASS
          E-Beam (25KGY)PASSPASSPASSPASSPASS
          E-Beam (50KGY)PASSPASSPASSPASS
          PASS


          Available Pore Size

          0.04μm, 0.05μm, 0.2μm and 1.0μm

           

          Biological Safety

          Meets USP<88>,for class VI-121℃ plastic

           

          Sterilization

          Autoclave, Ethylene Oxide, E-Beam, Gamma Irradiation.

           

          Available Format
          Membrane Discs,Roll, Sheet, Disc, Customization.




          For technical data sheet or application inquiry, you are more than welcome to contact our sales representative by sales@cobetterfilter.com or leave a message




          综合久久精品色,女人爽到高潮免费看视频,国产欧美日韩综合精品久久一区,亚洲日韩一区二区三区四区高清